Pages

Followers

Tuesday, 19 September 2017

CAS

Good morning and a very happy
So today over at the Digi Choosday blog the team were challenged to make something Clean and Simple, which you will see referred to as CAS. Of course the challege for you remains as always Anything Goes.
So here is my make for this week.
 For this I've used the new Winnie White Christmas Printed Paper Craft Kit, it's one of the sheets of Paper Delice with an image on a background. I've cut the image out with the largest of the three Elegant Nest die set from Polkadoodles. I've mounted the topper onto 3D foam and added a layer of silver glitter card behind the white layer. Finally I added a few pearls and  a flower and some foliage.

So don't forget to pop over to the blog and grab todays massive discount code. See you soon.


Friday, 15 September 2017

Design sheet

Good morning everyone, I'm here today with the latest make for the Polkadoodles challenge blog.
I've used the fab Winnie Special Moments collection to make this, and it is design sheet number 6, which you can buy here on it's own if you wish.
Noe don't forget to pop over to the blog to check out my teamies makes.

Tuesday, 12 September 2017

Winnie White Christmas take V

Good afternoon once again. I'm here today to share the last of my 5 makes for the new release products over at Polkadoodles, and here it is.
 For this make I've used the fabulous new USB kit, and this is one of the design sheets from it, well, it's part of a design sheet as there was lots left over. I sat and fussy cut everything by hand like I love doing. I've mounted all the bits and pieces on to 3D foam to make them all stand out from the back ground. Isn't this image just the cutest reindeer suit you've ever seen!!!
I'm sure by now you've all been and seen all the makes the team have been doing, of you've missed any of them you can go toour Facebook pages and have a look, or you can just go check out our gallery HERE, where you will find them all.

Christmas

Good morning and a very happy
Today over at the Digi Choosday blog, although the challenge is always anything goes for you, the team were challenge to make something for Christmas. Now I'm well in front with lots of my makes, especially my tags, so I thought I would do a card for a male. I've used the Work and Play 5, Festive Hollybobs collection to make this. And in particular, design sheet number 2 from the collection. All I've added is a cream card blank and some red card to layer up. I fussy cut everything and then mounted everything onto 3D foam.

 I think this would also be able to be given to a woman as well as a man, what do you think? And of any age too.
Now go over to the blog to grab today's discount code and of course get more Christmas ideas from the rest of the team.


Monday, 11 September 2017

Winnie White Christmas take llll

Good afternoon everyone, I hope you've all had a great weekend. I'm sharing another Winnie White Christmas make with you today, my 3rd one. Have you seen some of the stunners my teamies have been making on our Facebook pages? If not you really need to go look at them.

Anyways here is my 3rd make.
For this make I've used some of the double sided papers from the Holly Jolly paper pad. I've then used some of the cute animal characters and embellies from the fab USB. Where I've curled the corners of the paper back to show the other side, I added some squiggly lines to the card base to take away from the bareness. I used a pencil to curl the paper as it's quite a weighty papers. I've then used a dab of glue to hold it in place before added the holly embelly over the top. Can you spot the cute little cat at the bottom? I think this would look great printed onto glossy paper and used a a tree decoration!

So don't forget to join our Facebook Groups to see all the makes and grab any discount codes that may be floating around. Here is the Polkadoodles page, and here is the Digi Choosday page.

Right I'll see you tomorrow with my latest make for the Digi Choosday blog.


Friday, 8 September 2017

Winnie White Christmas mark 111

Good afternoon once again. I'm here to share my third make using the new Winnie White Christmas products from Polkadoodles.

 So on this make, which is a wooden hanging heart, I've used one of the papers and one of the paper deilice images from the Printed Papercrafting Kit. I fussy cut the image out by hand instead of a die this time just to show you how lovely they cut. I've also used lots of elements from the fabulous new USB. I can't believe how much is on this USB, it took me hours to look at everything, and it's so hard to decide what to use as it's all so lush! So I printed out lots and lots of embellies and sat and cut them all out while I was watching TV. After gluing the backing sheet onto the heart I ran around the edges with a red distress ink and added some faux stitching with a white pen. I then added some bakers twine and spiders web before attaching the image and all the embellies with 3D foam.

Thursday, 7 September 2017

Winnie White Christmas

Good afternoon all. I'm here with another make from the new collections at Polkadoodles. This time I've used one of the patterned paper card sheets and one of the Paper Delice toppers from the printed papercrafting kit. In this kit there are 35 printed sheets for you. 
They are:
25 Beautiful 350gsm A4 Printed sheets featuring Winnie images which co-ordinate with the White Christmas Collection.
  • A4 sheet - 5 designs x 5 of each included (25 sheets total)
  • Printed on heavyweight 350gsm silk cardstock to give you a really quality, heavyweight feel to your projects.
  • Not die-cut - YOU can cut these to whatever size/shape you wish using your own dies at home!
  • Each sheet has been segmented into 2 x A5 sections meaning you can make a minimum of 50 cards
Also includes
  • A4 printed Designer Cardstock
  • 250gsm heavyweight cardstock sheets
  • 5 Double-sided sheets x 2 sheets of each = 10 sheets (20 designs total)
TOTAL NO. PIECES IN THIS KIT = 35 SHEETS

I can't tell you how lush this is in real life, the photos don't do it justice at all! 
So I used my scissors to fussy cut around the beautiful Winnie image and cut the backing card into a bauble shape using my Scan N Cut. I added some blue ink around the edges and then ran some iridescent paste around the edges to make it look like snow. I also cut out some flowers from the left over bits of card stock and added some sparkly snow to them. I glued some lacy spider web type stuff on the bauble and then added some 3D foam to the back of Winnie and glued her in place in the middle. I finished it off by adding the flower and some ribbon.
 And there you have it. Now don't forget to check out all my teamies make over on our facebook pages. Have you joined them both? Here they are: Polkadoodles and Digi Choosday at Polkadoodles. See you there, and I'll be back at the same time tomorrow with another make.


Wednesday, 6 September 2017

Winnie White Christmas

Good afternoon everyone. So, did you see Nikky live on Facebook at 1pm? No, well go catch up HERE. She was there to launch her new products, eeeek, how exciting. Well I got a chance to play with them and make a few things to show you, and here is the first one.

 For this I used the most beautiful paper kit I have ever had my grubby hands on. It's called Winnie White Christmas and you can buy it HERE. You can also buy it in a bigger kit, a compendium, with a special USB too, yes I said USB!!! And you can get that HERE.
So the papers, well they're not papers, they're card stock, in this kit are just devine. You can really get it in a photo, but they are on the most strokable soft silk board, which gives you a lovely sheen. And as you can see it cuts perfectly with dies. I used the Bubbleicous frame die to cut this one. I have added some sparkly snow around the edges of the papers and on the topper so it looks like snow. I then used a die to cut some leftover bits of card to make some flowers to finish it off.
The team will be sharing all their makes over the next week or so so come and join our Facebook group to see them all. And I'll see you tomorrow with another make.

Tuesday, 5 September 2017

It's all about the boy

Good morning and a very happy 
 Today over at the Digi Choosday blog the team were challenged to make something for a male. Of course the challenge for you is as always, anything goes.
For my make I used the ever so cute Winston collection.
I used a Kraft card blank and Kraft card to may and layer as well as cream card stock. I think both go really well with this collection. I simply layered up two papers onto 3D foam, and then mounted the image onto Kraft and then cream card stock, and again mounted that using 3D foam. For a finishing touch I used one of the bows from the collection.
 Here is a close up for you.
Now don't forget to go over to the blog to grab today's massive discount code, and of course to get more male inspiration from the team. See you soon everyone.
I'm entering this into the following challenges:

Tuesday, 29 August 2017

Christmas

Good morning and a very Happy
This week at the Digi Choosday blog the team have been challenge to make something else for Christmas. And as I love my tags when making my one for last week I decided to make another one for this weeks make, so here it is.


Once again I used the Octavia Frosted Winter collection. I love the colours in this collection as that's what colour Christmas is in out house. My tree and decorations are all in these lovely blues and purples with some pink in there as well. 
I used 4 different papers cut into squares, the edges distressed with ink and faux stitching added around the edges with a white pen. They are then matted onto a tag die, which I have cut using the Stamps By Me Loving Wishes Tag die set. All the embellies are then fussy cut and mounted on using 3D foam to make them pop. The sentiment is from Christmas Tree Script stamp set from Polkadoodles.
Now don't forget to go over to the blog and grab today's discount code and of course to check out the rest of the teams makes. And for you to enter our Anything Goes challenge to win some fab prizes!


Friday, 25 August 2017

Hot colours

Good morning everyone. I'm here today with a new challenge from the Polkadoodles challenge blog. And that challenge set for the team is to use "Hot Colours" The challenge for you as always is Anything Goes. Here is my make.

I stamped one of the flowers randomly over a piece of water colour card in a sticky ink pad, the one I used is the Rare Earth Clear Glass one, and then used a clear embossing powder over the top. I colured the flowers in using the beautiful Pearl Colors water colour paints from Kuretake Gansai. Then I have used a hot pink ink over the rest of the card, the one I used was the Tim Holtz Pickled Raspberry. I then did the same process but this time using the fabulous Peacock stamp from the same stamp set, how fabulous is it! I then added some faux stitching around the edges of both using a white pen. Matted them onto a piece of white card and mounted onto 3D foam. I then used 3 more flowers done just the same and then cut out and added to the corner of the card to give it a bit more interest.
Why not come over and join in the challenge for your chance to win some fab goodies!